deejjjaaaa писал(а):ГУЙ тем временем появился = http://forum.luminous-landscape.com/ind ... c=118075.0
After some delay, v1.0.3 has been released:
New: now possible to adjust hues with a+b sliders in addition to
hue+chroma, for additional control of chromaticity, especially near
the neutral axis.
New: Jab adjustment patch in the look adjustment editor as an
alternative to the default JCh adjustment. Again for better control
around the neutral axis.
Fixed: apply any custom target adjustments before finding out whitest
patch rather than after.
Fixed: accept longer patch names to better support SpectraShop CGATS
Fixed: matrix calculate button was in some situations incorrectly
disabled with white patch auto setting.
Fixed: now full unicode support in all filenames on Windows.
Fixed: portable filenames in the .zip archives (so Mac archives work
on Windows and vice-versa even if non-ASCII filenames are used).
Fixed: when DCP tone curves are imported they are now interpolated
using cubic spline, as said in the DNG specification 220.127.116.11
(before it was linear).
Fixed: locked GUI on MacOS when opening project files from the Finder.
Fixed: glare matching setting didn’t stick.
Fixed: crash with custom grids due to automatic flatfield correction
was falsely triggered.
Fixed: crash when using CMP Digital Target 8.
Fixed: uninitialized data access on toolbox tab change leading to
crashes in some occassions.
As you see mostly fixes, but I finally added the Jab controls for color adjustments as suggested by "daicehawk" a while back. The main advantage with Jab is better control near the neutral axis, but some users prefer Jab over JCh also further away from neutral. Note that if you make DNG profiles the ability to tune the neutrals are limited in practice as the DCP format doesn't allow colorizing neutrals. If you're really hardcore I guess you could disable all neutrals on the target except one and tune that, and that way shift the fixed neutral.
Сейчас этот форум просматривают: zenwolf и 4 гостя